Giriş
Ürünler/Firmalar
Hizmetler/Arsiv
Firmamız/Referanslar

 

 

 

 


Giriş Üst Sayfa OMNIA HYPOT III HYPOT ULTRA III HYPOT MAX


Associated Research tarafından üretilmekte olan tüm cihazlara ilişkin bilgiler aşağıda verilmektedir. 

Her türlü detay bilgi ve talebiniz için bizlerle temasa geçmenizi rica ederiz.


Elektriksel Güvenlik Testleri ile ilgili Teorik ve Pratik Bilgi İçeren Kitapçık

OMNIA Elektriksel Güvenlik Test Sistemi

 
  

  
  

   

The OMNIA 8100 series is a family of multi-functional electrical safety compliance analyzers that consist of three models. OMNIA 4, model 8104, is a 4-in-1 instrument that provides AC/DC Hipot, Insulation Resistance and 40 Amp Ground Bond tests. OMNIA 5, model 8105, is a 5-in-1 instrument that provides AC/DC Hipot, Insulation Resistance, 40 Amp Ground Bond and Functional Run tests. OMNIA 6, model 8106, is a 6-in-1 instrument that provides AC/DC Hipot, Insulation Resistance, 40 Amp Ground Bond, Functional Run and Line Leakage tests

  
  
 Model Description
 8104 AC/DC, IR, & 40 Amp GB Tester
 8105 AC/DC, IR, 40 Amp GB, & Run Tester
 8106 AC/DC, IR, 40 Amp GB, Run & LL Tester

 

  

 

 

  

HypotULTRA III is a multi-function dielectric analyzer with an enhanced graphic LCD and analog bar graph. HypotULTRA III has two models that provide AC and AC/DC/IR Hipot testing solutions. An optional 4-port or 8-port internal scanner is available for both models. Both models are available with IEEE-488 (GPIB), RS-232 or printer interfaces. HypotULTRA III can also be controlled through AUTOWARE®, our stand alone test software.

 

 

 

  

Hypot III is a manual Dielectric Withstand tester with an enhanced graphic LCD. It consists of three models that include AC Hipot, DC Hipot and AC/DC/IR. It can be used as a bench top instrument or controlled through enhanced PLC Remote Control. Additionally, each model can be interconnected to the HYAMP III family of ground bond testers to form a mid-range electrical safety test system with one DUT connection.

 

 

 

  

The HypotMAX™ series is a family of high voltage and high current electrical safety compliance analyzers that consist of six models. The 7700 is a 3-in-1 model that provides 500 VA AC Hipot, DC Hipot, and Insulation Resistance testing. The 7704 is a 4-in-1 model that adds a 30 Amp Ground Bond testing to this functionality. The 7705 is a 10 KV AC Hipot tester, the 7710 is a 12 KV DC Hipot tester, the 7715 is a 20 KV AC Hipot tester and the 7720 is a 20 KV DC Hipot tester. All of these instruments are available with IEEE-488 (GPIB), RS-232 or printer interfaces. HypotMAX can also be controlled through AUTOWARE®, our stand alone test software.

Model Description
 7620 0-5KV AC Hipot Tester
 7650 0-5KV AC/DC Hipot w/IR Tester

 

 
 Model Description
 3605 5KVAC Hipot Tester
 3665 5KVAC, 6KVDC Hipot Tester
 3670 5KVAC, 6KVDC, w/IR Hipot Tester

 

 
 Model Description
 7700 500 VA AC/DC & IR Tester
 7704 500 VA AC/DC/IR & GB Tester
 7705 10 KV AC Hipot Tester
 7710 12 KV DC Hipot Tester
 7715 20 KV AC Hipot Tester
 7720 20 KV DC Hipot Tester

 

     

 

 

  

LINECHEK is a fully automated Line Leakage Tester. It was designed to automate line leakage testing in a production line environment. LINECHEK model 510L is a stand alone Line Leakage tester. This model is available with IEEE-488 (GPIB) or RS-232 interfaces. LINECHECK can also be controlled through AUTOWARE®, our stand alone test software.

 

 

 

  

HYAMP III is a manual Ground Bond tester with an enhanced graphic LCD. It consists of three models, one with 30 amps of Ground Bond test current, one with 40 amps of Ground Bond test current and one with 60 amps of Ground Bond test current. All models can be used stand alone or interconnected to the Hypot III family to form a mid-range electrical safety test system with one DUT connection. HYAMP III can be used as a bench top instrument or controlled through enhanced PLC Remote Control. 

 

 

  

RUNCHEK is a fully automated Functional Run tester that will measure leakage current, voltage, power factor and watts while applying power to the DUT. RUNCHEK was designed to be interconnected to our full line of testers enabling all safety and functional run tests to be completed through a single DUT connection. RUNCHEK is available with IEEE-488 (GPIB) or RS-232 interfaces and can also be controlled through AUTOWARE®, our stand alone test software.

 

Model Description
 510L Stand Alone LLT 

 

 
Model Description
 3130 30A Ground Bond Tester
 3140 40A Ground Bond Tester
 3160 60A Ground Bond Tester

 

 
Model Description
 905D Run Test System 

 

     

 

 

  

 

  

  

 

  

The 4500D is an entry-level Dielectric Withstand tester. It was designed for 500VA safety agency production line compliance testing. It can be used as a bench top instrument or controlled through simple PLC Remote Control.

 

 

 

 

 

View information on Autoware S8456, enhanced control software for electrical safety compliance testing, which is used with the OMNIAT series of electrical safety compliance analyzers. Visitor's can also download a free evaluation copy of Autoware S8456.
 

View information on Autoware® S9870, control software for electrical safety compliance testing. Autoware S9870 is used with QUADCHEK® II, HypotMAX, HypotULTRA® III, HypotULTRA® II, LINECHEK® and RUNCHEK® series of instruments.

 The SC6540 is a modular scanner is designed to automate multi-point and multi-product testing when using OMNIA, HypotULTRA III, QUADCHEK II and HypotULTRA II. The modular design provides for a variety of configurations. The SC6540 can be configured with 8 HV testing channels, 16 HV testing channels, 8 High Current testing channels, 16 High Current testing channels, or even 8 High Voltage and 8 High Current testing channels. Each of these configurations can then be configured as a "Master" scanner with its own power source that is controlled through automation or as a "Slave" scanner without its own power module that is controlled through a "Master" scanner or the electrical safety tester.


 

 Model Description
 4500 5KVAC 500VA Hipot Tester
 
  
  
 
Model Description
 SC6540 Modular Scanning Matrix  

 

 

 

 

 
     
     

 

HIZLI SEÇİM TABLOSU

 8106  OMNIA 6, 5kV @ 40mA AC, 5kV @ 20mA DC, IR Test, 40 Amp Ground Bond, Functional Run Test & Line Leakage Test
 8105  OMNIA 5, 5kV @ 40mA AC, 5kV @ 20mA DC, IR Test, 40 Amp Ground Bond & Functional Run Test
 8104  OMNIA 4, 5kV @ 40mA AC, 5kV @ 20mA DC, IR Test, 40 Amp Ground Bond & Optional HV & HC Scanner
 7720  20kV DC @ 5mA    
 7715  20kV AC @ 10mA    
 7710  12kV DC @ 5mA    
 7705  10kV AC @ 10mA    
 7704  5kV AC@ 100mA, (500VA), 6KV DC@(cont)10mA, IR, 30 Amp GB 
 7700 5kV AC @ 100mA, (500VA), 6kV DC @ 10mA & IR Test  
 7650  5kV @ 30mA AC, 5kV @ 10mA DC & IR Test with Optional Scanner
 7620  5kV @ 30mA AC with Optional Scanner
 4500D  5kV @ 100mA AC (500VA) 
 3670  5kV @ 20mA AC, 6kV @ 7.5 mA DC & IR Test  
 3665  5kV @ 20mA AC, 6kV @ 7.5 mA DC  
 3605  5kV @ 20mA AC  
 3160 60 Amp Ground Bond   
 3140 40 Amp Ground Bond   
 3130 30 Amp Ground Bond